OEM High Quality Rotating Envelope X Ray Tube Factories -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray

OEM High Quality Rotating Envelope X Ray Tube Factories - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray

OEM High Quality Rotating Envelope X Ray Tube Factories - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

We've one of the most innovative manufacturing devices, experienced and qualified engineers and workers, recognized good quality handle systems and also a friendly experienced income team pre/after-sales support for X Ray Tube, Radiation Protection Goggles, Varian X Ray, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
OEM High Quality Rotating Envelope X Ray Tube Factories - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray Detail:

Maximum Operating Voltage 150KV
Focal Spot Size 0.6/1.2
Diameter 73mm
Target Materia RTM
Anode Angle 12°
Rotation Speed 2800/8400RPM
Heat Storage 300kHU
Maximum Continuous Dissipation 750W
 Large Focus 5.4A
Small Focus 5.4A
Inherent Filtration 1mmAl/75KV(IEC60522/1999)
Maximum Power(0.1S) (50/60Hz)  20KW/50KW

(150/180Hz) 30KW/74KW

SRMWTX (2)
SRMWTX (1)
SRMWTX (3)
SRMWTX (4)

Anode drive:150Hz/180Hz

X-ray tube will emit X-ray when it is energized with high voltage, Special knowledge should be required and cautions need to be taken when handing it.
1.Only a qualified specialist with X-Ray tube knowledge should assemble,maintain and remove the tube.
When mounting tube inserts adopt proper caution, in order to avoid glass bulb breaking and fragments projection. Please use protective gloves and glasses.
2.Tube insert connected to H.V.supply is radiation source:be sure to take all necessary safety cautions.
3.Wash thoroughly with alcohol the external surface of tube insert(care of fire risk).Avoid contact of dirty surfaces with cleaned tube insert.
4.Clamp system inside housing or self-contained units must not mechanically stress the tube.
5.After installation, check the right working of the tube(no fluctuation of tube current nor crackling).
6.Comply with insert thermal parameters, planning and programming the exposure parameters and cooling pauses. Housing or self-contained units must be provided with an adequate thermic protection.
7.Voltages indicated in charts are valid for transformer supplied with ground center.
8.It is extremely important to observe the connection diagram and the grid resistor value. Any change could modify the dimensions of the focal spot, also varying diagnostic performances or overloading anode target.
9.Tube inserts contain environment polluting materials, particularly lead liner tubes, Please apply to qualified operator for waste disposal, according to local regulation requirements.
10.When any abnormalities are found during operation, immediately switch off the power supply and contact the service engineer.

◆This high vacuum product is produced according to state-of-the-art technology. To prevent implosion please handle with care and use protective devices, e.g.glasses!

◆In the interest of complying with legal requirements concerning the environmental compatibility of our products(protection of natural resources, avoidance of waste)we endeavor to reuse components and to return them to the production cycle. We guarantee the functioning, quality and life of these components by taking extensive quality assurance measures, just as for factory-new components.


Product detail pictures:

OEM High Quality Rotating Envelope X Ray Tube Factories -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray detail pictures

OEM High Quality Rotating Envelope X Ray Tube Factories -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray detail pictures


Related Product Guide:

Persisting in High quality, Prompt Delivery, Aggressive Price, now we have established long-term cooperation with consumers from equally overseas and domestically and get new and old clients' large comments for OEM High Quality Rotating Envelope X Ray Tube Factories - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray , The product will supply to all over the world, such as: Auckland, Gambia, Vietnam, We take measure at any price to attain essentially the most up-to-date gear and procedures. The packing of nominated brand is our a further distinguishing feature. The solutions to assure years of trouble-free service has attracted a great deal customers. The goods are obtainable in improved designs and richer variety, they're produced scientifically of purely raw supplies. It accessible in a variety of designs and specifications for the selection. The newest forms are much far better than the previous one and they're extremely popular with several clients.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • This manufacturer can keep improving and perfecting products and service, it is in line with the rules of market competition, a competitive company.
    5 Stars By Edwina from Algeria - 2017.12.31 14:53
    In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
    5 Stars By Federico Michael Di Marco from California - 2018.12.30 10:21
    Write your message here and send it to us