OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray

OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray

OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

Generally customer-oriented, and it's our ultimate goal for being not only the most trusted, trustable and honest provider, but also the partner for our customers for Lead Glass Shielding, Wedge Filter Radiography, The Xray Tube, At our firm with good quality initially as our motto, we manufacture merchandise that are entirely made in Japan, from materials procurement to processing. This enables them for being used with confident peace of mind.
OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray Detail:

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit
The integrated high quality tube with glass design has one super imposed focal spot and a reinforced anode. The high anode heat storage capacity ensures a wide range of applications for panoramic dental application. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit.

Nominal Tube Voltage 105kV
Nominal Inverse Voltage 115kV
Nominal Input Power(at 1.0s) 950W
Max. Anode Cooling Rate 250W
Max. Anode Heat Content 35kJ
Filament Characteristics Ifmax3.5A,5.5±0.5V
Nominal Focal Spot 0.5 (IEC60336/2005)
Target Angle
Target Material Tungsten
Cathode type W filament
Permanent Filtration Min. 0.5mmAl/50 kV(IEC60522/1999)
Dimensions 140mm length by 42mm diameter
Weight 380 grams

KL5-0.5-105

Cautions
Read the cautions before using the tube
X-ray tube will emit X –ray when it is energized with high voltage, Special knowledge
should be required and cautions need to be taken when handling it。
1. Only a qualified specialist with X-Ray tube knowledge should assemble, maintain
and remove the tube。
2. Sufficient care should be taken to avoid strong impact and vibration to the tube
because it is made of fragile glass。
3. Radiation protection of the tube unit must be sufficiently taken。
4. The minimum sorce-skin distance (SSD) and the minimum filtration should match the
regulation and meet the standard。
5. The system should have proper overload protection circuit , the tube may be
damaged due to only one overload operation。
6. When any abnormalities are found during operation , immediately switch off the
power supply and contact the service engineer。
7. if the tube is with a lead shield, to dispose of lead shield must meet government
regulations。

Elevated anode heat storage capacity and cooling
Constant high dose yield
Excellent lifetime


Product detail pictures:

OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray detail pictures


Related Product Guide:

we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is You come here with difficulty and we supply you with a smile to take away for OEM High Quality Rotating Anode X Ray Generator Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray , The product will supply to all over the world, such as: French, Mauritania, Croatia, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part products. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Lynn from Nairobi - 2017.09.28 18:29
    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Julie from Barbados - 2017.12.02 14:11
    Write your message here and send it to us