OEM High Quality Rotating Anode X Ray Factory -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray

OEM High Quality Rotating Anode X Ray Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray

OEM High Quality Rotating Anode X Ray Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Diy High Voltage Generator, Röntgen Tube, Beryllium X Ray Tube, We welcome new and old clients from all walks of lifestyle to speak to us for potential organization relationships and mutual success!
OEM High Quality Rotating Anode X Ray Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray Detail:

Maximum Operating Voltage 150KV
Focal Spot Size 0.6/1.2
Diameter 73mm
Target Materia RTM
Anode Angle 12°
Rotation Speed 2800/8400RPM
Heat Storage 300kHU
Maximum Continuous Dissipation 750W
 Large Focus 5.4A
Small Focus 5.4A
Inherent Filtration 1mmAl/75KV(IEC60522/1999)
Maximum Power(0.1S) (50/60Hz)  20KW/50KW

(150/180Hz) 30KW/74KW

SRMWTX (2)
SRMWTX (1)
SRMWTX (3)
SRMWTX (4)

Anode drive:150Hz/180Hz

X-ray tube will emit X-ray when it is energized with high voltage, Special knowledge should be required and cautions need to be taken when handing it.
1.Only a qualified specialist with X-Ray tube knowledge should assemble,maintain and remove the tube.
When mounting tube inserts adopt proper caution, in order to avoid glass bulb breaking and fragments projection. Please use protective gloves and glasses.
2.Tube insert connected to H.V.supply is radiation source:be sure to take all necessary safety cautions.
3.Wash thoroughly with alcohol the external surface of tube insert(care of fire risk).Avoid contact of dirty surfaces with cleaned tube insert.
4.Clamp system inside housing or self-contained units must not mechanically stress the tube.
5.After installation, check the right working of the tube(no fluctuation of tube current nor crackling).
6.Comply with insert thermal parameters, planning and programming the exposure parameters and cooling pauses. Housing or self-contained units must be provided with an adequate thermic protection.
7.Voltages indicated in charts are valid for transformer supplied with ground center.
8.It is extremely important to observe the connection diagram and the grid resistor value. Any change could modify the dimensions of the focal spot, also varying diagnostic performances or overloading anode target.
9.Tube inserts contain environment polluting materials, particularly lead liner tubes, Please apply to qualified operator for waste disposal, according to local regulation requirements.
10.When any abnormalities are found during operation, immediately switch off the power supply and contact the service engineer.

◆This high vacuum product is produced according to state-of-the-art technology. To prevent implosion please handle with care and use protective devices, e.g.glasses!

◆In the interest of complying with legal requirements concerning the environmental compatibility of our products(protection of natural resources, avoidance of waste)we endeavor to reuse components and to return them to the production cycle. We guarantee the functioning, quality and life of these components by taking extensive quality assurance measures, just as for factory-new components.


Product detail pictures:

OEM High Quality Rotating Anode X Ray Factory -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray detail pictures

OEM High Quality Rotating Anode X Ray Factory -  Rotating Anode X-ray Tubes  MWTX73-0.6_1.2-150H – Sailray detail pictures


Related Product Guide:

We have now a hugely efficient team to deal with inquiries from buyers. Our goal is 100% client gratification by our solution high-quality, rate & our team service and take pleasure in a great popularity among clients. With several factories, we will provide a wide assortment of OEM High Quality Rotating Anode X Ray Factory - Rotating Anode X-ray Tubes MWTX73-0.6_1.2-150H – Sailray , The product will supply to all over the world, such as: Georgia, Slovakia, Cairo, The products has a good reputation with competitive price, unique creation, leading the industry trends. The company insists on the principle of win-win idea, has establishedglobal sales network and after-sales service network.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
    5 Stars By Elsie from Anguilla - 2017.09.30 16:36
    We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
    5 Stars By Irene from Sevilla - 2017.09.30 16:36
    Write your message here and send it to us