OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray

OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray

OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

We take customer-friendly, quality-oriented, integrative, innovative as objectives. Truth and honesty is our administration ideal for Radiation Protection Goggles, X Ray Tube Ebay, Copper Filter X Ray, We've been confident that there'll become a promising future and we hope we can have long lasting cooperation with consumers from all over the world.
OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray Detail:

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit
The integrated high quality tube with glass design has one super imposed focal spot and a reinforced anode. The high anode heat storage capacity ensures a wide range of applications for panoramic dental application. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit.

Nominal Tube Voltage 105kV
Nominal Inverse Voltage 115kV
Nominal Input Power(at 1.0s) 950W
Max. Anode Cooling Rate 250W
Max. Anode Heat Content 35kJ
Filament Characteristics Ifmax3.5A,5.5±0.5V
Nominal Focal Spot 0.5 (IEC60336/2005)
Target Angle
Target Material Tungsten
Cathode type W filament
Permanent Filtration Min. 0.5mmAl/50 kV(IEC60522/1999)
Dimensions 140mm length by 42mm diameter
Weight 380 grams

KL5-0.5-105

Cautions
Read the cautions before using the tube
X-ray tube will emit X –ray when it is energized with high voltage, Special knowledge
should be required and cautions need to be taken when handling it。
1. Only a qualified specialist with X-Ray tube knowledge should assemble, maintain
and remove the tube。
2. Sufficient care should be taken to avoid strong impact and vibration to the tube
because it is made of fragile glass。
3. Radiation protection of the tube unit must be sufficiently taken。
4. The minimum sorce-skin distance (SSD) and the minimum filtration should match the
regulation and meet the standard。
5. The system should have proper overload protection circuit , the tube may be
damaged due to only one overload operation。
6. When any abnormalities are found during operation , immediately switch off the
power supply and contact the service engineer。
7. if the tube is with a lead shield, to dispose of lead shield must meet government
regulations。

Elevated anode heat storage capacity and cooling
Constant high dose yield
Excellent lifetime


Product detail pictures:

OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray detail pictures


Related Product Guide:

To constantly improve the management system by virtue of the rule of sincerely, good faith and quality are the base of enterprise development, we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for OEM High Quality Radiographic Filters Manufacturer - Dental X-ray Tube CEI OPX105 – Sailray , The product will supply to all over the world, such as: Chile, America, Pakistan, So far our products have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have 13years professional sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
    5 Stars By Martha from Comoros - 2017.02.28 14:19
    Hope that the company could stick to the enterprise spirit of Quality, Efficiency, Innovation and Integrity, it will be better and better in the future.
    5 Stars By Tony from Israel - 2017.02.14 13:19
    Write your message here and send it to us