China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray

China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray

China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

We have been also specializing in improving the things administration and QC system to ensure that we could preserve terrific gain within the fiercely-competitive company for Mobile X Ray Unit, Portable X Ray Machine Cost, The X Ray Tube, We sincerely welcome domestic and overseas retailers who phone calls, letters asking, or to vegetation to negotiate, we will present you good quality goods as well as the most enthusiastic assistance,We glance forward in your check out and your cooperation.
China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray Detail:

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit
The integrated high quality tube with glass design has one super imposed focal spot and a reinforced anode. The high anode heat storage capacity ensures a wide range of applications for panoramic dental application. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

KL5-0.5-105 Stationary anode X-Ray Tube is especially designed for panoramic dental x-ray unit and available for a nominal tube voltage 105kV with single-phase full-wave rectified or DC circuit.

Nominal Tube Voltage 105kV
Nominal Inverse Voltage 115kV
Nominal Input Power(at 1.0s) 950W
Max. Anode Cooling Rate 250W
Max. Anode Heat Content 35kJ
Filament Characteristics Ifmax3.5A,5.5±0.5V
Nominal Focal Spot 0.5 (IEC60336/2005)
Target Angle
Target Material Tungsten
Cathode type W filament
Permanent Filtration Min. 0.5mmAl/50 kV(IEC60522/1999)
Dimensions 140mm length by 42mm diameter
Weight 380 grams

KL5-0.5-105

Cautions
Read the cautions before using the tube
X-ray tube will emit X –ray when it is energized with high voltage, Special knowledge
should be required and cautions need to be taken when handling it。
1. Only a qualified specialist with X-Ray tube knowledge should assemble, maintain
and remove the tube。
2. Sufficient care should be taken to avoid strong impact and vibration to the tube
because it is made of fragile glass。
3. Radiation protection of the tube unit must be sufficiently taken。
4. The minimum sorce-skin distance (SSD) and the minimum filtration should match the
regulation and meet the standard。
5. The system should have proper overload protection circuit , the tube may be
damaged due to only one overload operation。
6. When any abnormalities are found during operation , immediately switch off the
power supply and contact the service engineer。
7. if the tube is with a lead shield, to dispose of lead shield must meet government
regulations。

Elevated anode heat storage capacity and cooling
Constant high dose yield
Excellent lifetime


Product detail pictures:

China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray detail pictures

China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of China wholesale Rotating Anode X Ray Factory - Dental X-ray Tube CEI OPX105 – Sailray , The product will supply to all over the world, such as: Eindhoven, kazakhstan, Nepal, Our company adheres to the spirit of lower costs, higher quality, and making more benefits for our clients. Employing talents from the same line and adhering to the principle of honesty, good faith, real thing and sincerity, our company hopes to gain common development with clients from both at home and abroad!

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
    5 Stars By Colin Hazel from Morocco - 2018.11.06 10:04
    This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
    5 Stars By Alexia from Cape Town - 2018.09.19 18:37
    Write your message here and send it to us