China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray

China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray

China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray

Short Description:


Product Detail

Payment & Shipping Terms:

Product Tags

Related Video

Feedback (2)

Quality comes first; service is foremost; business is cooperation is our business philosophy which is constantly observed and pursued by our company for Protective Housing X Ray Tube, Dr Tube, Hv Generator, The team of our company along with the use of cutting-edge technologies delivers impeccable top quality products supremely adored and appreciated by our shoppers worldwide.
China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray Detail:

KL10-0.6/1.8-110 Stationary anode X-Ray tube is especially designed for Mobile Units for radiography, for Portable Radiographic Units, and available for a nominal tube voltage with high frequency or DC generator.
The integrated high quality tube with glass design has one super imposed focal spot and a reinforced anode.
The high anode heat storage capacity ensures a wide range of applications for mobile, portable applications. A special designed anode enables an elevated heat dissipation rate which leads to a higher patient throughput and a longer product life. A constant high dose yield during the entire tube life is ensured by the high density tungsten target. Ease of integration into system products is facilitated by extensive technical support.

KL10-0.6/1.8-110 Stationary anode X-Ray tube is especially designed for Mobile Units for radiography, for Portable Radiographic Units, and available for a nominal tube voltage with high frequency or DC generator.

Nominal Tube Voltage 110kV
Nominal Focal Spot small:0.6   large:1.8(IEC60336/2005)
Filament Characteristics small:Ifmax=4.5A,Uf=5±0.5  large:Ifmax=4.5A,Uf=6.3±0.8V
Nominal Input Power(at 1.0s) small:spot0.6kW  large:spot5.2kW
Maximum Continuous Rating 225W
Anode Heat Storage Capacity 30kJ
Target Angle 15°
Target Material Tungsten
Inherent Filtration Min 0.6mmAl equivalent at 75kV
Weight approx600g

AKL10-0.6-1.8-110

Maintaining seasoning schedule

Prior to usage, season the tube in accordance with the seasoning schedule given below until the required tube voltage is attained. Example given – needs to revise by the manufacturer and specified in the data sheet of the part: Initial incoming seasoning and seasoning schedule for idle period (more than 6 months) Circuit: DC (Center grounded)

KL10 老练图

When the tube current is unstable in seasoning, immediately switch off the tube voltage and after an interval of 5 minutes or more, increase the tube voltage gradually from the low voltage while making sure that the tube current is stable. The withstand voltage performance of the tube unit will be lowered as the exposure time and the number of operation increase. Stain-like impact traces might appear on the x-ray tube target surface by slight discharge in the course of the seasoning. These phenomena are one process to recover the withstanding voltage performance at that time. Therefore, if it is in stable operation at the maximum tube voltage of seasoning subsequent to them, the tube unit can be used without any interference to its electrical performance which in use.

Elevated anode heat storage capacity and cooling
Constant high dose yield
Excellent lifetime


Product detail pictures:

China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray detail pictures

China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray detail pictures

China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray detail pictures


Related Product Guide:

Good quality comes 1st; assistance is foremost; business enterprise is cooperation is our business enterprise philosophy which is regularly observed and pursued by our company for China wholesale Portable X Ray Machine Factories - Mobile X-ray Tube CEI 110-15 – Sailray , The product will supply to all over the world, such as: Albania, Grenada, Seattle, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in beauty and other industries. Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

Minimum Order Quantity: 1pc

Price: Negotiation

Packaging Details: 100pcs per carton or customized according to the quantity

Delivery Time: 1~2 weeks according to the quantity

Payment Terms: 100% T/T in advance or WESTERN UNION

Supply Ability: 1000pcs/ month

  • We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
    5 Stars By Anna from Manchester - 2018.12.25 12:43
    The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
    5 Stars By Antonio from Auckland - 2017.08.18 11:04
    Write your message here and send it to us